LINEAR PATTERN_PART DESIGN @ GROOVE OPERATION 23MM

 

Green Led Light with Mblock 5. cathode gnd anode pin 2 plus 250 u resistance.

M6 GROOVE OPERATION USING ADDITIONAL TRIANGLE AND RECTANGULAR SHAPES BECAUSE SKETCH NOT APPLIED ON CIRCULAR FACE.

 

TINKERCAD CIRCUIT SIMULATION....

 

M6 SCREW FORMATION WITH REVOLVE AND POCKET OPERATION IN PART DESIGN WORKBENCH

 

7 SEGMENT DISPLAY WORK WITH ARDUINO UNO

byte pin[] = {2, 3, 4, 5, 6, 7, 8, 9};//arduino pin array
 
int number[9][8] = {//number array
  {1, 1, 0, 0, 0, 1, 1, 1},//1
  {0, 0, 1, 0, 0, 0, 1, 0},//2
  {1, 0, 0, 0, 0, 0, 1, 0},//3
  {1, 1, 0, 0, 0, 1, 0, 0},//4
  {1, 0, 0, 0, 1, 0, 0, 0},//5
  {0, 0, 0, 0, 1, 0, 0, 0},//6
  {1, 1, 0, 0, 0, 0, 0, 1},//7
  {0, 0, 0, 0, 0, 0, 0, 0},//8
  {1, 1, 0, 0, 0, 0, 0, 0},//9
};
 
void setup() {
  for (byte a = 0; a < 8; a++) {
    pinMode(pin[a], OUTPUT);//define output pins
  }
}
 
void loop() {
  for (int a = 0; a < 9; a++) {
    for (int b = 0; b < 8; b++) {
      digitalWrite(pin[b], number[a][b]);//display numbers
    }
    delay(500);//delay
  }
}

The Importance of Sensors in Flight Control Cards

The sensors and the flight control board are like a nervous system. The flight control card, which is the brain of the unmanned aerial vehicles (UAV), evaluates the information it receives from the sensors, giving the engines the necessary power. It allows the UAV to make the desired movement. The correct processing of the information received from the sensors and the control of the motors requires professional software and experience.

 

Ultrasonic Distance Sensor buzzer volume increases less than 20cm (park sensor) demo arduino

SCREW-OUTER THREADS ON PART MODULE BENCH.